| How to Prevent Household Appliance Fires Posted: Most homes have a multitude of electrical appliances ranging from small kitchen items such as toasters and microwaves to major appliances like clothes dryers and dishwashers. While appliances make our lives much easier, they also pose significant risks - including fire - if not maintained properly. Appliance fire safety is a matter of keeping your appliances in good working order, as well as using them as they were intended. The average homeowner has several thousand dollars invested in appliances. To protect your investment and to avoid the potential risk of fire, find out what to check for to ensure your appliances don't put you or your family at risk.[1][2] It is important to prevent fires before they come. An important step would be to think ahead. Contents Steps Prevention - Immediately fix appliances or lamps that sputter or spark in any way.
- Keep appliances away from wet areas, especially in the kitchen, bathroom, basement, and garage.
- If an appliance has a three-prong plug, never force it into a two-prong outlet or extension cord. Also, be wary of torn/significantly beat up extension cords.
- Check your wiring on a regular basis. Look for outlets that don't work, light switches that are hot to the touch, and lights that flicker. This could mean something is wrong and should be checked by an electrician.
- Keep clothes, curtains, and other potentially combustible items at least three feet from all heaters.
Clothes Dryer Fire Safety - Have your dryer installed and serviced by a professional.
Clean the lint filter before or after each use. - Rigid or flexible metal venting materials should be used to sustain proper air flow and drying time.
- Make sure the air exhaust vent pipe is not restricted and the outdoor vent flap will open when the dryer is operating.
- Once a year, or more often if you notice that it is taking longer than normal for your clothes to dry, clean lint out of the vent pipe or have a dryer lint removal service do it for you.
- Keep dryers in good working order. Gas dryers should be inspected by a professional to ensure that the gas line and connection are intact and free of leaks.
- Make sure the right plug and outlet are used and that the machine is connected properly.
- Do not leave a dryer running if you leave home or when you go to bed.
- Never dry items that have come in contact with flammable substances, such as cooking oil, gasoline, paint thinner, or alcohol.
- Keep the dryer area clear of things that can burn, such as boxes or clothing.
Washer Fire Safety - Avoid overloading a washing machine.
- Washing machines should be properly grounded.
Never force a three-prong cord into a two-slot outlet.
Extension Cords When it comes to appliance safety, one of the most commonly used and misused items is the extension cord. -
Never overload extension cords or wall sockets. - Regularly check your extension cords to make sure the plastic is not worn away or coming apart at the ends. Replace or repair loose or frayed cords.
- Avoid using an extension cord as permanent wiring. Consider having additional circuits or outlets added by a qualified electrician so you do not have to use extension cords.
- Instead of a simple extension cord, get a laboratory-tested extension cord with built-in circuit breakers.
- Avoid running extension cords across doorways or under carpets.
Oven Ranges The most common household accidents happen when operating the family oven or range. To reduce this risk: - Keep burners, the stove top, and oven clean and free of grease and other flammable debris.
- Never leave flammable items such as hot pads or towels near burners.
- Don't leave food cooking unattended.
- Never spray aerosols near a flame.
- Always turn pot handles inward to avoid the possibility of knocking a pot off the stove.
- Never wear clothing with long, loose sleeves while cooking.
- Periodically inspect electrical cords and gas connections for wear and damage.
Microwave Ovens - Never operate a unit with a door that is bent, warped, or otherwise damaged in a way that prevents it from closing firmly.
- Don't stand directly in front of the microwave while it is operating.
- Avoid overheating liquids; they may super-heat and erupt, causing severe burns.
- Never operate an empty oven.
- Keep the inside of the oven, the door, and all seals clean and free of debris.
- Never use metal pans and utensils in the unit as arcing will occur.
- Periodically check for microwave leakage with an FDA-approved testing device.
Electrical System Safety Replace worn, old, or damaged appliance cords right away. - The electrical outlet in the bathroom should have a Ground Fault Circuit Interrupter (GFCI). This is a tool that protects you from a dangerous shock when water and electricity come together. An electrician can install a GFCI for you.
- All electrical outlets and switches should be covered by "face plates."
- Inspect electrical cords to make sure they are in good condition.
- Don't tie or knot cords.
- Don't let furniture sit on cords.
Tips - Have a working smoke alarm that alerts you to both a fire that has flames and a smoky fire that has fumes without flames. It is called a "Dual Sensor Smoke Alarm." A smoke alarm greatly reduces your chances of dying in a fire.
- Make and practice a home fire escape plan and set a meeting place outside. Make sure everyone in your family knows at least two escape routes from their bedrooms.
- In the US, residential appliance fires annually result in an estimated:[3]
- 9,600 fires
- 25 deaths
- 525 injuries
- $211 million in property loss
Related wikiHows Sources & Citations |
| How to Culture Greenwater Posted: Greenwater or phytoplankton Greenwater, or phytoplankton, are known by most aquarium hobbyists as good quality small fish fry food, like betta fry. This article will outline some of the ways you can make your own. Steps Simpler, slower method - Put aged aquarium water in a clear container.
- Expose the water to the sun. Doing this takes quite a long time for the algae to bloom. See the next method for something faster.
Faster method - Pluck 10 smoothly surfaced and thin leaves.
- Wash and rinse the leaves until they are clean. Don't use soap!
- Put the leaves in the blender with water. You can also add fish micro pellets to help the culture bloom more quickly.
- Blend the water with the leaves. Do this for about 1 minute.
- Sieve any blended leaves and put the water in a bottle.
- Put the bottle under a bright light overnight so that the phytoplankton will bloom.
- Fill a bucket with water.
- Put the greenwater that has been sitting under a bright light overnight in the bucket.
- Let the bucket sit under the sun. In about a few days, the phytoplankton will grow.
Tips - Use smooth, thin leaves so they will easily blend in a kitchen blender. Avoid adding hard and thick leaves they will not emulsify well.
- You will notice quite alot of algae on the surface of the water- this is phytoplankton. At this time, you may add daphnia culture (waterfleas) to the phytoplankton. Your local pet store is a good source of Daphnia. The adult stage of the Daphnia are a great live food for the aquarium.
Warnings - Do not feed the fresh blended greenwater straight to your fry! Let it sit under the light so the phytoplankton will grow and all of the cells in the leaves died first. Some cells in the leaves are the defense system of the plant and this can kill your fry.
Related wikiHows |
No comments:
Post a Comment