How to Make a Grass Pot for Cats

Posted:

If you have an indoor cat, a grass pot for chewing on can make a caring addition to your cat's daily activities. Cats eat grass as a way to help their stomachs work well, so this is a good health measure if your cat never goes outdoors.

Steps

Purchase a suitable pot. Select a plain or fancy one, as preferred–the cat won't mind the design but you might want to make it fit in with your home decor.
Fill with suitable potting soil. Follow the directions for safety on the potting soil mixture.
This is "cat grass" - ask your garden center
Purchase grass seed from a garden center.
Sow the seeds directly into the potting soil and water regularly. It won't take long to sprout.
- If preferred, you can dig up some grass from a garden of a friend or neighbor–a small clump will be adequate to get your pot started.
Place the pot of grass in an area that is safe for your cat to access and chew on. Keep it out of the way of human walking areas and don't place it anywhere that might be spoiled if the pot tips over accidentally and dirt spills on the ground.

Tips

Consider having two pots of grass growing so that you can rotate them between indoor and outdoor for freshness, even if you keep one on a balcony only.

Warnings

Keep other plants out of reach from your cat. Once your cat is used to eating grass from a pot, she might investigate other plant opportunities in the house. If you have any plants that are poisonous to cats in your home, remove them.

Things You'll Need

Pot with saucer to catch water
Potting soil
Grass seeds or grass clump
Watering can or bottle

Related wikiHows

Article Tools

How to Make a Trash Can Puppet

Posted:

This project is called a trash can puppet for two reasons. It's cylindrical, like a trash can, and it's made from leftover bits of fabric that might otherwise end up in a trash can. Use leftover materials you have on hand to make yours as wacky and as wonderful as you like.

This project will take a little bit of sewing skill, but if you have used a sewing machine before, it should be within your reach.

Steps

Choose some leftover fabric. It will help if the fabric has a bit of stiffness to it. This sample started out as corduroy and some reclaimed denim from an old pair of jeans. If your leftover fabric isn't stiff enough or if you think it should be stiffer, iron it to some interfacing before you sew.
Cut two circles. A round object, such as a pot lid, bowl, or CD, will help. Here, the red corduroy will become the top of the puppet's head and the
- Make these circles decently large, about 6 inches (15cm) in diameter. You can size the other piece to them, so don't worry about the exact diameter.
- Sew a zig-zag stitch around the edges of the rounds if necessary to keep them from fraying.
Pin the two rounds together.
Pin the two rounds together, right sides together.
Sew a semicircle.
Sew around the rounds in a semicircle. Sew only halfway around, leaving the other half open.
Finished seam with reliefs.
Cut reliefs around this semicircle. Reliefs help keep the fabric along a curved seam from bunching and puckering when it's turned right side out.
Cut a rectangle of fabric.
Cut a rectangle of fabric. Make the length of this rectangle the same as the circumference of the circle, plus a little extra for seam allowance. Make it as long as you want the neck of the puppet, plus a bit for a lower hem and upper seam allowance.
Sew a zig-zag around the outer edge.
Sew a zig-zag stitch around the edge of this rectangle, as necessary to keep it from fraying.
Sew a tube and hem one end.

The finished tube, with a hem at one end.
Sew the ends of the rectangle together, right sides together, to form a tube. Then, fold over twice and hem the end that will be the bottom of the puppet.
Pin starting at the back.
Pin the tube to the loose flaps on the head. You'll have to think inside out a little.
- Pin right sides together but wrong sides out.
- Start at the back of the head, and place the seam from the tube so it will end up at the back of the head.
- Another view of the pinned puppet.
  Pin all the way around. You should end up with the top of the tube pinned halfway around to the loose part of the back of the head (here, red corduroy) and the other half pinned to the loose part of the bottom of the mouth (here, black denim). It should look like the finished puppet, only inside out.
Sew around the top of the tube.
Sew all the way around the top of the tube, where you have just pinned. Half of this seam will go into the head fabric; the other half will go into the mouth fabric. This is the last major seam for this puppet.
- Remove the pins and turn the puppet right side out at this point, to make sure you're on the right track.
Relieve the seams.
Relieve the rounded seams you just sewed.
Turn the puppet right side out to see the basic shape.
Make a tack to form the neck.
Make a tack or pleat to close up the neck a little bit (optional).
Decorate!
Decorate the puppet any way you want. You can glue or sew on eyes, hair, ears, a tongue, horns, or just about anything else. See the sock puppet article for lots of ideas. This puppet has yarn hair and a larger variation on these yarn eyeballs that started with short chunks of PVC pipe.

Tips

A similar design.
Now that you know how this puppet goes together, keep in mind that the head and mouth fabric does not need to be circular, and the top of the head does not need to be flat. You can make a beak or nose, or sew the head into a cone or other shape. Just cut the mouth to follow the shape of the head and size the lower tube accordingly.

Warnings

Be careful of using small parts on puppets for very small children. If you're not sure, wait until they're at least three years old to give them a puppet like this.

easy solutions

Wednesday, April 21, 2010